2. Remove the rubber cover on the charging port on the right
side of the battery. Insert the charger output plug into the
battery charging port.
3. Plug the charger into a power outlet. Charging should
initiate and will be indicated by the LED charge status light on
the charger turning red.
4. Once fully charged, the charging indicator light turns green.
Unplug the charger from the power outlet first and then
remove the charger output plug from the battery charging
port. Avoid leaving the charger plugged in when the battery is
fully charged.
WARN:
1. Do not leave your battery unattended while it is charging.
2. Do not charge the battery with chargers other than the
charger provided by Philodo Bikes.
3. Only charge the battery indoors in dry spaces which are not
excessively hot or cold.
4. Ensure there is no dirt, debris, or flammable items nearby
when using the charger.
5. The charger will automatically stop charging once the
battery reaches its full capacity.
6. Store the battery indoors in a dry space, away from heat or
flame sources and out of direct sunlight.
7. The charger may get hot when charging. Use caution and
avoid touching the body of the charger.
To Next Page
Loading...
