PHILODO H8 - Error Codes; Safety; Pre-ride Safety Check and Inspection

- 28 -
Error Codes
Error Code
Meaning
Most Common Solution
E006
Battery Undervoltage
Fully Charge Battery
E007
Motor Fault
Check Motor Quick Plug
E008
Throttle Fault
Check Throttle Quick Plug
E009
Controller Fault
Check Controller Connections
E010
Display
Communication
Reception Failure
Check Display Quick Plug
E011
Display
Communication
Send Failure
Check Display Quick Plug
Safety
Helmets and Local Laws
Always wear a helmet when riding your eBike. Ensure that the
helmet fits your head and is securely tightened down. Before
riding, read local laws and comply with all rules relating to
cycling and eBiking in your area. If you attach a seat for children
to the bike, they must also be wearing a properly fitted helmet at
all times.
Pre-ride Safety Check and Inspection
Before each ride, make sure to inspect your eBike to ensure there
are no loose fasteners or accessories. Make sure to specifically
check that both the front and rear axles are secure. Also, make
sure both the handlebar and the handlebar stem are not loose.