3. While holding the seat in the desired position, use a 6 mm
allen wrench to tighten the seat angle adjustment bolt
securely to the recommended torque value.
External Battery
For your convenience, the PHILODO batteries can be removed.
Lock Open Install the battery
1. Insert the battery key into the keyport. Turn the key
counter-clockwise to open the lock.
2. Carefully slide the battery into the frame mount receptacle.
Turn the key clockwise to lock the battery on the frame. Then
remove the key.
Turn ON/OFF the battery
ON OFF
1. The external battery on Philodo Jumbo is equipped with a
switch. The switch controls the output of the battery. It
locates at the right of the battery, beside the charging port.
2. Press the symbol － to turn on the battery power. You need
to turn it on before turning on the ignition switch and display.
To Next Page
