1. When the battery is removed, be careful not to drop or
damage the battery. Avoid damaging the exposed connector
terminals and keep them clear of debris.
2. When Installing the battery, sliding the battery into the
frame mount receptacle. Do not force the battery into the
receptacle. slowly align and push the battery down into the
receptacle.
3. Ensure the battery has been properly secured to the bike
before each use. Pulling carefully upwards on the battery with
both hands to test the security of the attachment of the
battery to the mount.
4. Before each use, close the battery lock and remove the key.
If the lock does not close or the key cannot be removed, the
battery has not been properly installed.
5. Keep the keys properly. If the unique keys are lost, you
will not be able to turn on the bike or replace the battery. If
necessary, you should get more spare keys. We don't have a
backup key.
Charge Your E-Bike
1. The battery can be charged while attached or detached
from the bike. To remove the battery, see the previous
remove battery section for details. You should plug your
battery in when you first receive it to ensure it is fully charged
prior to your first ride.
To Next Page
Loading...
