22
Step 2: Then push the right button to toggle the parameters of the day.
The parameters displayed in the LCD will toggle in this order :
SOC morning (State of Charge in the morning) - SOC evening (State of Charge in the
evening) - V
bat max (Maximum Battery Voltage) - Vbat min (Minimum Battery Voltage) -
Ah
in (Panel Amperehours) - Ahout (Load Amperehours) - SOC morning (State of Charge
in the morning) - SOC evening (State of Charge in the evening) - ...
Please see Fig.
F
(Page 5) for reference.
If no operation are carried out to CXM for more than 1 minute, the CXM will switch to
Power Saving Mode automatically with nothing displayed on LCD.
Please press left button once to wake up the CXM for normal operation.
Power Saving Mode
Batteries store a large amount of energy. Never short circuit a battery under any
circumstances. We recommend connecting a fuse (slow acting type) directly to the
battery.
Batteries can produce flammable gases. Avoid making sparks, using fire or any naked
flame under any circumstances. Make sure that the battery room is ventilated.
General Safety and Usage Recommendation
To Next Page
Loading...