Phoenix Controls PCM Series - Applications

©2009 Phoenix Controls. Specifications subject to change without notice. Rev. 11/11 MKT-0244 MPC-1673 PROGRAMMABLE CONTROL MODULE: LONMARK 3
APPLICATIONS
The Phoenix Controls PCM is a programmable input/output module that may be used as:
• A standalone controller
Physical sensors and switches may be connected to the PCM, which then performs the desired control by using built-in
functions (see section below) to switch or modulate PCM outputs.
• An input/output (I/O) expansion module
Physical sensors, switches and actuators may be connected to the PCM and values passed across the room-level network to a
Celeris valve controller for use in its control sequence. Data from the PCM may also be passed across the building-level network
to the BMS for monitoring purposes.
• A controller integrated into the Celeris, Theris or Traccel system
Data may be passed between the valve mounted controllers and PCM on the room-level network to supplement the control
functions of either device. An example might be interlocking door locks between an anteroom and a space under control so that
doors may not be opened until the pressure stabilizes or a certain number of air changes have occurred.
Outputs
Digital
1
24 Vac Triac, digital (on/off), floating
2
or PWM
• 0.75A @158
°
F (70
°
C)
• 1A @ 104
°
F (40
°
C)
• PWM control: adjustable period from 2 seconds to 15 minutes
•Min. pulse on/off: 500 msec.
• Adjustable drive time period
• External or internal power supply (jumper selectable)
Universal Software configurable
• 0-10 Vdc, 0-20 mA
3
, digital 0-12 Vdc (on/off), floating or PWM
• PWM control: adjustable period from 2 seconds to 15 minutes
• Floating control: requires two consecutive outputs
• Min. pulse on/off: 500 msec.
• Adjustable drive time period
• 60 mA max. @ 12 Vdc 140
°
F (60
°
C)
• Minimum resistance 200 
• Auto-reset fuse
• 60 mA @140
°
F (60
°
C)
• 100 mA @68
°
F (20
°
C)
Output Resolution 10-bit analog/digital converter
Power Supply
15 Vdc; maximum 240 mA
3
DC Relay Kit
Relay • Coil Characteristics:
• Rated voltage: 12 Vdc
• Rated current: 33.3 mA
• Resistance: 360 
• Minimum operating voltage: 8.4 V
• Operating Temperature: -40
o
F to 185
o
F (-40
o
C to 85
o
C)
• Storage Temperature: -40
o
F to 221
o
F (-40
o
C to 105
o
C)
• Agency Approvals: VDE, RU, CSA, RoHS
• Contact Characteristics:
• Maximum power rating: 2500 VA
• Rated current: 10A
• Rated voltage: 250 Vac
• Standard contact material: Silver-nickel 90/10
• Type of Duty: Continuous
• Mechanical life expectancy: 1x10
6
operations
• Weight: 10 grams
Dimensions (L x W x H): 3.0" x .62" x 2.42" (76.2 mm x 15.8 mm x 61.5 mm)
1
PCM200 and PCM201 only.
2
Floating control: requires two consecutive outputs.
3
PCM203 only.