Phoenix FS0440E User Manual

Ph Sf Cpny r eac n s gurte
BATTERY INSTALLATION – 4 X LR03 AAA ALKALINE
(SUPPLIED)
1. FIRST OPENING ON FACTORY DEFAULT CODE
Step 1 Press ‘C’ button
Step 2 Press factory code ‘ 1 2 3 4 5 6’
Step 3 Press ‘#’ button, a melodic tone will sound and the display
 conrmsOPEnd
Step 4 Turn Knob or Handle clockwise and open the door while the
tone is sounding
Caution
Ifanincorrectcodeisentered,Errorwillappearinthedisplaypanelanda
shortwarningtonewillsound.Ifanincorrectcodeisenteredvetimesthe
lockwillceasetooperateforveminutes,awarningtonewillsoundand
thedisplaywillindicatedELAY.
C > 1 > 2 > 3 > 4 > 5 > 6 > #
2. SETTING A NEW PERSONAL CODE.
Itisadvisabletosetanewcodewiththedooropenandtestthenewcode
before closing the door.
Step 1 Press ‘#’ button
Step2 EnterthePresentCode.
Step 3 Press ‘#’ button.
Step4 EnterNew4~16digitCode.
Step 5 Press ‘# button.
For Example:
If the present code is 1 2 3 4 5 6 and a new four digit code is decided as 4
2 4 2 press buttons as below.
# 1 2 3 4 5 6 # 4 2 4 2 #
EnTErdwillbeindicatedinthedisplayandashort3secondtonewill
soundtoconrmthechangeto4242
# > 1 2 3 4 5 6 > # > 4 2 4 2 > #
3. SETTING THE DUAL CONTROL FUNCTION WHERE
TWO OPERATORS WITH INDIVIDUAL PERSONAL CODES
ARE REQUIRED TO OPEN THE LOCK.
With the door in the open position set the second code.
Step 1 Press the “M” memory button recessed into the back
of the door.
Step 2 Press ‘2’ button
Step 3 Press ‘#’ button
Step4 Enter2ndPersonalcode
Step 5 Press ‘#’ button
EnTErdwillbeindicatedinthedisplayandashort3secondtonewill
sound,toconrmthe2ndcodeentry.
For Example:
If the present code is 4 2 4 2 and a second new four digit code is decided
as6789pressbuttonsasbelow.EnTErdwillappearinthedisplay
accompaniedbyashorttonetoconrmM2#6789#
M > 2 > # > 6 7 8 9 > #
4. TO ACTIVATE DUAL CONTROL
Step 1 Press the “M” memory button recessed into the back of the
door.
Step 2 Press ‘9’ button
Step 3 Press ‘#’ button
M > 9 > #
5. TO OPERATE WITH THE DUAL CONTROL FUNCTION
Step 1 Press C button dual will appear in the display.
Step2 Entertherstcode4242
Step3 Press‘#’button.ashort3secondtonewillsoundtoconrm
correct code
Step 4 Within 5 minutes enter the second code 6 7 8 9
Step5 Press‘#button.ashort3secondtonewillsoundtoconrm
 correctcodeandOPEndwillappearinthedisplayandthelock
 willbeopen.Eithercodecanbeenteredrstorsecond.
C > 4 2 4 2 > # > 6 7 8 9 > #
6. TO DEACTIVATE DUAL CONTROL
Step 1 Press the “M” memory button recessed into the back of the
door.
Step 2 Press ‘9’ button
Step3 Press‘#’buttonashort3secondtonewillsoundtoconrm
 deactivationandSinGLEwillappearinthedisplay.Thesecond
code will be automatically erased.
M > 9 > #
7. TO HIDE CODE IN THE DISPLAY AND TURNOFF
KEYPAD SOUND.
Activate Pressthe“M”memorybuttonrecessedintothebackofthe
 door,press7then#(HIdEappearsinthedisplay)
DeactivatePressthe“M”memorybuttonrecessedintothebackofthe
door, press 7 then #
M > 7 > #
8. TO HIDE CODE ENTRY IN A NUMBER SEQUENCE.
The code can be disguised by inserting random numbers either before,
after or both before and after, the personal code. This procedure is
designedtoincreasesecurityandtoconfuseapotentialobserver
attempting to memorise the code. This feature can be also be used
withhiddencodedisplayandsilentkeypadasat7above.
For Example
Personalcodeissetas4242Randomprexnumbers61Randomsu󰀩x
numbers 91507
Step 1 Press C button
Step2 EnterCodeas61424291507
Step 3 Press ‘#’ button
ThedisplaywillconrmOPEnd
C > 61 4 2 4 2 91507 > #
9. ALARM SETTING
Activate Pressthe“M”memorybuttonrecessedintothebackofthe
 door,press8then#(ALErTappearsinthedisplay)M > 8 > #
Deactivate
Step 1 Press ‘C button
Step2 EnterPersonalCode
Step3 Press‘#’buttonashort3secondtonewillsoundtoconrm
 deactivationandOPEndwillappearinthedisplay.
C > Personal Code > #
10. BATTERY LIFE: 1 YEAR 3 TIMES A DAY.
BATTERY REPLACEMENT IS REQUIRED WHEN:
1. LObAttappearsindisplayaccompaniedbyashortonesecondwarn-
ing tone.
2. Correct code is entered but lock will not open.
3. Evenifbatteriesarecompletelyexhausted,thecodesarenotlost.
11. BATTERIES
4x1.5VAAAAlkalineBatteriesarerequiredtoactivatethelock.Used
batteries should not be disposed of with normal domestic waste. These
shouldbedisposedofatapprovedcollectionpoints.Youmay
alsoreturnusedbatteriestoyourRetailerattheirexpense
(whereapplicable).
V1/PBJUL2018
KeypadandLCDdisplaywindow
CButton
start button
#Button
Batteryposition
under keypad
2. Press the keypad opening mark, to
release the retaining arm and swing the
keypad up and left, to open.
1.Removekeypad
retaining screw
Upper
part
Lower
part
OpeningBatteryCompartment
OPERATING INSTRUCTIONS FOR FS0440E
& GUARANTEE REGISTRATION

Phoenix FS0440E Specifications

General

Model	FS0440E
Category	Safes
Material	Steel
Warranty	2 years
Fire Resistance	Yes
Lock Type	Electronic Lock
Fire Rating	60 minutes