Phoenix DS2500E User Manual

Ph Sf Cpny r eac n s gurte
BATTERY INSTALLATION – 4 X LR03 AAA ALKALINE
(SUPPLIED)
1. FIRST OPENING ON FACTORY DEFAULT CODE
Step 1 Press ‘C’ button
Step 2 Press factory code ‘ 1 2 3 4 5 6’
Step 3 Press ‘#’ button, a melodic tone will sound and the display
 conrmsOPEnd
Step 4 Turn Knob or Handle clockwise and open the door while the
tone is sounding
Caution
Ifanincorrectcodeisentered,Errorwillappearinthedisplaypanelanda
shortwarningtonewillsound.Ifanincorrectcodeisenteredvetimesthe
lockwillceasetooperateforveminutes,awarningtonewillsoundand
thedisplaywillindicatedELAY.
C > 1 > 2 > 3 > 4 > 5 > 6 > #
2. SETTING A NEW PERSONAL CODE.
Itisadvisabletosetanewcodewiththedooropenandtestthenewcode
before closing the door.
Step 1 Press ‘#’ button
Step2 EnterthePresentCode.
Step 3 Press ‘#’ button.
Step4 EnterNew4~16digitCode.
Step 5 Press ‘# button.
For Example:
If the present code is 1 2 3 4 5 6 and a new four digit code is decided as 4
2 4 2 press buttons as below.
# 1 2 3 4 5 6 # 4 2 4 2 #
EnTErdwillbeindicatedinthedisplayandashort3secondtonewill
soundtoconrmthechangeto4242
# > 1 2 3 4 5 6 > # > 4 2 4 2 > #
3. SETTING THE DUAL CONTROL FUNCTION WHERE
TWO OPERATORS WITH INDIVIDUAL PERSONAL CODES
ARE REQUIRED TO OPEN THE LOCK.
With the door in the open position set the second code.
Step 1 Press the “M” memory button recessed into the back
of the door.
Step 2 Press ‘2’ button
Step 3 Press ‘#’ button
Step4 Enter2ndPersonalcode
Step 5 Press ‘#’ button
EnTErdwillbeindicatedinthedisplayandashort3secondtonewill
sound,toconrmthe2ndcodeentry.
For Example:
If the present code is 4 2 4 2 and a second new four digit code is decided
as6789pressbuttonsasbelow.EnTErdwillappearinthedisplay
accompaniedbyashorttonetoconrmM2#6789#
M > 2 > # > 6 7 8 9 > #
4. TO ACTIVATE DUAL CONTROL
Step 1 Press the “M” memory button recessed into the back of the
door.
Step 2 Press ‘9’ button
Step 3 Press ‘#’ button
M > 9 > #
5. TO OPERATE WITH THE DUAL CONTROL FUNCTION
Step 1 Press C button dual will appear in the display.
Step2 Entertherstcode4242
Step3 Press‘#’button.ashort3secondtonewillsoundtoconrm
correct code
Step 4 Within 5 minutes enter the second code 6 7 8 9
Step5 Press‘#button.ashort3secondtonewillsoundtoconrm
 correctcodeandOPEndwillappearinthedisplayandthelock
 willbeopen.Eithercodecanbeenteredrstorsecond.
C > 4 2 4 2 > # > 6 7 8 9 > #
6. TO DEACTIVATE DUAL CONTROL
Step 1 Press the “M” memory button recessed into the back of the
door.
Step 2 Press ‘9’ button
Step3 Press‘#’buttonashort3secondtonewillsoundtoconrm
 deactivationandSinGLEwillappearinthedisplay.Thesecond
code will be automatically erased.
M > 9 > #
7. TO HIDE CODE IN THE DISPLAY AND TURNOFF
KEYPAD SOUND.
Activate Pressthe“M”memorybuttonrecessedintothebackofthe
 door,press7then#(HIdEappearsinthedisplay)
DeactivatePressthe“M”memorybuttonrecessedintothebackofthe
door, press 7 then #
M > 7 > #
8. TO HIDE CODE ENTRY IN A NUMBER SEQUENCE.
The code can be disguised by inserting random numbers either before,
after or both before and after, the personal code. This procedure is
designedtoincreasesecurityandtoconfuseapotentialobserver
attempting to memorise the code. This feature can be also be used
withhiddencodedisplayandsilentkeypadasat7above.
For Example
Personalcodeissetas4242Randomprexnumbers61Randomsu󰀩x
numbers 91507
Step 1 Press C button
Step2 EnterCodeas61424291507
Step 3 Press ‘#’ button
ThedisplaywillconrmOPEnd
C > 61 4 2 4 2 91507 > #
9. ALARM SETTING
Activate Pressthe“M”memorybuttonrecessedintothebackofthe
 door,press8then#(ALErTappearsinthedisplay)M > 8 > #
Deactivate
Step 1 Press ‘C button
Step2 EnterPersonalCode
Step3 Press‘#’buttonashort3secondtonewillsoundtoconrm
 deactivationandOPEndwillappearinthedisplay.
C > Personal Code > #
10. BATTERY LIFE: 1 YEAR 3 TIMES A DAY.
BATTERY REPLACEMENT IS REQUIRED WHEN:
1. LObAttappearsindisplayaccompaniedbyashortonesecondwarn-
ing tone.
2. Correct code is entered but lock will not open.
3. Evenifbatteriesarecompletelyexhausted,thecodesarenotlost.
11. BATTERIES
4x1.5VAAAAlkalineBatteriesarerequiredtoactivatethelock.Used
batteries should not be disposed of with normal domestic waste. These
shouldbedisposedofatapprovedcollectionpoints.Youmay
alsoreturnusedbatteriestoyourRetailerattheirexpense
(whereapplicable).
V1/PBMAY2018
KeypadandLCDdisplaywindow
CButton
start button
#Button
Batteryposition
under keypad
2. Press the keypad opening mark, to
release the retaining arm and swing the
keypad up and left, to open.
1.Removekeypad
retaining screw
Upper
part
Lower
part
OpeningBatteryCompartment
OPERATING INSTRUCTIONS FOR DS2500E
& GUARANTEE REGISTRATION

Phoenix DS2500E Specifications

General

Brand	Phoenix
Model	DS2500E
Category	Safes
Language	English

Summary

BATTERY INSTALLATION

CORE SAFE OPERATIONS

1. FIRST OPENING ON FACTORY DEFAULT CODE

Open the safe using the factory default code.

5. TO OPERATE WITH THE DUAL CONTROL FUNCTION

Operate the safe using dual control codes.

9. ALARM SETTING

Configure the alarm setting for the safe.

CODE MANAGEMENT AND SECURITY FEATURES

2. SETTING A NEW PERSONAL CODE

Set a new personal code for the safe.

7. TO HIDE CODE IN THE DISPLAY AND TURNOFF KEYPAD SOUND

Hide code display and disable keypad sound.

8. TO HIDE CODE ENTRY IN A NUMBER SEQUENCE

Disguise code entry with random numbers.

DUAL CONTROL FUNCTIONALITY

3. SETTING THE DUAL CONTROL FUNCTION

Configure dual control for two operators.

4. TO ACTIVATE DUAL CONTROL

Activate the dual control function.

6. TO DEACTIVATE DUAL CONTROL

Deactivate the dual control function.

BATTERY AND MAINTENANCE

10. BATTERY LIFE AND REPLACEMENT

Understand battery life and replacement indicators.

11. BATTERIES

Information on required battery types and disposal.

DS2500 BASE FIXING INSTRUCTIONS

CHOOSING A PLACE TO INSTALL YOUR SAFE

Select a suitable location for the safe.

DRILLING & BOLTING

Secure the safe to the floor using bolts.

SECURING THE DATABOX INTO THE SAFE

Attach the databox inside the safe.

GUARANTEE REGISTRATION