PHOENIX METAL PRODUCTS, INC
TL600/TL700 LAVATORY SERVICE TRUCK
12
MAY 2018
CHAPTER 1
GENERAL INFORMATION AND OPERATION INSTRUCTIONS
SECTION 1 - SPECIFICATIONS AND CAPABILITIES
VEHICLE: FORD, GASOLINE
(1) DESCRIPTION: FORD, MODEL F350 SUPER DUTY, GVWR 13,000 LBS, WHEELBASE 137”
(2) CHASSIS SPECIFICATIONS:
A. ENGINE - FORD MODEL 5.4L TRITON 3 VALVE SINGE OVERHEAD CAM SEFI (SEQUENTIAL
ELECTRONIC FUEL INJECTION). 300 HP @ 5,000 RPM, 365 LBS. TORQUE @ 3.750 RPM ,
STAINLESS STEEL EXHAUST, ALUMINUM HEADS AND CAST IRON BLOCK.
B. TRANSMISSION- 5 SPEED TORQUE SHIFT AUTOMATIC TRANSMISSION
C. FRONT AXLE - TWIN “I” BEAM INDEPENDENT
D. REAR AXLE - 3.73 RATIO DUAL WHEEL
E. BRAKES - 4 WHEEL ANTILOCK BRAKE SYSTEM
F. TIRES/WHEELS - 215/85R-16E - 10 PLY TUBELESS STEEL BELTED RADIALS - ALL SEASON.
16 X 6 - 6 HOLE DISC WHEELS
G. STEERING - INTEGRAL POWER STEERING TILT STEERING COLUMN
H. FUEL TANK - CAPACITY 40 U.S. GALLONS, AFT MOUNTED
I. ELECTRICAL - 12 VOLT, NEGATIVE GROUND, 140 AMP ALTERNATOR WITH INTERNAL
REGULATOR
J. FRAME - LADDER TYPE CHANNEL SECTION STRAIGHT FRAME RAIL
K. CAB -ALL STEEL CAB
Property of American Airlines
To Next Page
Loading...
General