PHOENIX METAL PRODUCTS, INC
TL600/TL700 LAVATORY SERVICE TRUCK
32
MAY 2018
AUX 1 IDLE-UP SWITCH
FORD IDLE-UP
CHAPTER 1
SECTION 3 - OPERATION
AIRCRAFT SERVICING WITH PLATFORM LIFT (CONT’D)
(4) REMOVE WASTE HOSE COUPLING FROM STOWAGE NIPPLE IN TRAY OF WASTE TANK.
CONNECT WASTE CONNECTOR TO LIFT PLATFORM HOSE HOLDER.
(5) PULL FLUID HOSE FROM DRIVERS SIDE REAR COMPARTMENT (HOSE PROTRUDES
FROM REAR OF MODULE). PULL A SLIGHTLY LONGER LENGTH OF HOSE THAN YOU
NEED SO THAT THE REEL WILL LOCK. REST HOSE IN LIFT PLATFORM HOSE HOLDER.
(6) ENTER LIFT PLATFORM FROM DRIVER SIDE OF LOWER PLATFORM. CLOSE LIFT
PLATFORM GATE. VISUALLY INSPECT OVERHEAD AREA FOR CLEARANCE.
Property of American Airlines
To Next Page
Loading...