PHOENIX METAL PRODUCTS, INC
TL600/TL700 LAVATORY SERVICE TRUCK
33
MAY 2018
CHAPTER 1
SECTION 3 - OPERATION
AIRCRAFT SERVICING WITH PLATFORM LIFT (CONT’D)
(7) HOLD OPERATIONAL SAFETY TOGGLE SWITCH TO ON WHILE HOLDING LIFT
TOGGLE SWITCH IN UP POSITION UNTIL DESIRED HEIGHT IS ACHIEVED.
(8) CONNECT WASTE HOSE CONNECTOR TO AIRCRAFT WASTE HOLDING TANK FITTING
AND DRAIN AIRCRAFT TANK ACCORDING TO YOUR ORGANIZATION’S PROCEDURES.
(9) DISCONNECT WASTE HOSE FROM AIRCRAFT AND STOW ON WASTE HOSE HOLDER.
(10) CONNECT LAVATORY CHARGE HOSE TO AIRCRAFT LAVATORY FILL FITTING ON
AIRCRAFT.
(11) FILL LAVATORY TANK BY HOLDING THE OPERATIONAL SAFETY SWITCH TO THE ON
POSITION WHILE HOLDING THE PUMP TOGGLE SWITCH TO THE ON POSITION ALSO.
FOR TRUCKS WITH OPERATIONAL SAFETY PUSHBUTTON , SIMPLY HOLD THE PUMP
BUTTON DOWN TO START FLOW AND RELEASE TO STOP FLOW.
(12) DISCONNECT CHARGE HOSE FROM AIRCRAFT AND STOW IN HOSE HOLDER.
(13) HOLD OPERATIONAL SAFETY BUTTON/TOGGLE SWITCH TO ON WHILE PUSHING LIFT
TOGGLE SWITCH IN THE DOWN POSITION UNTIL LIFT IS ALL THE WAY DOWN.
(14) STOW WASTE HOUSE ON WASTE HOSE STANCHION.
(15) STOW CHARGE HOSE ON HOSE REEL BY PULLING HOSE UNTIL REEL RETRACTS. HOLD
HOSE AS REEL RETRACTS TO PREVENT DAMAGE TO HOSE REEL.
Property of American Airlines
To Next Page
Loading...