40
15. Rebooting your hearing aid
Follow the steps below if your hearing aid is in an error
state. This will not remove or delete any program or
setting.
1.
Press the lower part of the multi-function button for at
least 15 seconds. It does not matter if the hearing aid is
switched on or o before you start pressing the button.
There is no light or acoustic notication at the end of the
15 seconds.
2.
Place the hearing aid in the power-connected charger
and wait until the indicator light blinks green. This can
take up to 30 seconds. The hearing aid is now ready to use.
To Next Page
Loading...
Need help?
General
