Need help?Do you have a question about the Phonic MU 200 XP and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Phantom Power | Yes |
| Frequency Response | 20Hz-20kHz |
| Inputs - Mic Preamps | 2 |
| Outputs - Main | 2 |
| Aux Sends | 1 |
Details on connecting microphones, line-level devices, and stereo sources.
Information on AUX returns for processed audio and AUX/Effects sends.
Description of Main L/R outputs, Control Room, Phones, Record Out, and 2T Return.
Connectors for external effects control, alternate bus, and channel processing.
AC power input, fuse access, and passive speaker connection points.
Power switch and phantom power activation for microphone inputs.
Gain, EQ (High, Mid, Low), and 75Hz Low Cut filter for input channels.
Controls for AUX 1/Monitor, AUX 2/Effects sends, and Pan/Balance adjustments.
Controls for selecting, adjusting, and activating digital effects, including display and indicators.
Controls for AUX stereo returns, control room source selection, and signal assignment.
Controls for main L/R fader, control room/submix level, and level metering.
Indicators for Phantom Power (+48V) and main Power status.
Diagram illustrating various ways to connect instruments and devices for application.
List of books recommended by Phonic for advanced audio engineering study.
To Next Page
