Phonic P450 - Introduction to Phonic Loudspeakers; Product Features Overview; 450 Series Features (P450;PA450); 550 Series Features (P550;PA550)

PHONIC CORPORATION
Page 3P(A)450/550 USER ’ S MANUAL
INTRODUCTION
Thank you for purchasing the Phonic ’ S P450/550
and PA450/550 sound reinforcement molded
loudspeaker. The development of these
non-powered and powered bi-amplified speaker
system is a natural extension of Phonic ’ S
extensive experience and knowledge of
professional audio equipments. These speakers
truthfully reproduce sound for a wide range of
applications. Please take some time to go through
this manual for best performance as well as
longest possible operation life from your
P450/550 and PA450/550. And remember to
keep it safely for future reference.
FEATURES
P450 and PA450
• Frequency response: 50Hz ~ 20KHz
• 12" long-throw low frequency transducer
• High SPL Output/Low Distortion
• Multi-cell high-dispersion horn with ultra-
wide audience coverage (90
o
x45
o
)
• Precision titanium compression driver
• Ergonomic handles for easy transport
• Stackable, stand mountable and arrayable
• Reclines for use as a stage monitor
• Tough, impact-resistant, lightweight molded
enclosure
P450
• 250 watts (RMS) / 500 watts (program) power
handling
• High sound pressure level, 96dB SPL @ 1W/
1M
• Speakon and 1/4" jack connectors included
PA450
• 330 watts RMS (250W LF/80W HF)
delivered to the internal transducers
• Built-in precision 24dB/oct. Linkwitz-Riley
electronic crossover
• 3-input mixer, 2-band EQ and link out
• Maximum sound pressure level: 121 dB
SPL @ 1M
• Electronic Time Correction, Phase
Alignment, & Equalization
P550 and PA550
• Frequency response: 40Hz ~ 20KHz
• 15" long-throw low frequency transducer
• High SPL Output/Low Distortion
• Multi-cell high-dispersion horn with ultra-
wide audience coverage (90
o
x45
o
)
• Precision titanium compression driver
• Ergonomic handles for easy transport
• Stackable, stand mountable and arrayable
• Reclines for use as a stage monitor
• Tough, impact-resistant, lightweight molded
enclosure
P550
• 300 watts (RMS) / 600 watts (program) power
handling
• High sound pressure level, 98dB SPL @ 1W/
1M
• Speakon and 1/4" jack connectors included
PA550
• 400 watts RMS (300W LF/100W HF)
delivered to the internal transducers
• Built-in precision 24dB/oct. Linkwitz-Riley
electronic crossover
• Maximum sound pressure level: 124 dB SPL
@ 1M
• 3-input mixer, 2-band EQ and link out
• Electronic Time Correction, Phase
Alignment, & Equalization
INTRODUCTION / FEATURES