Phonic POWERPOD K-16 PLUS - INTRODUCTION; FEATURES

4 POWERPOD K16 Plus
PL US
INTRODUCTION
Thank you for your purchase of the Powerpod
K-16 Plus Powered Mixer. The K-16 Plus is of a
high standard of quality that is synonymous with
all of Phonic’s products and is sure to be a valu-
able investment. To ensure, however, that you
take full advantage of this product, we advise
you to carefully read the entire manual before
storing in a place that is easy to remember and
easy to access if necessary.
We know how eager you are to get started –
wanting to get the mixer out and hook it all up
is probably your number one priority right now
- but before you do, we strongly urge you to take
a look through this manual. Inside you will nd
important facts and gures on the set up, use
and applications of your brand new mixer. If you
do happen to be one of the many people who
atly refuse to read users manuals, then we urge
to at least glance at the Instant Setup section.
After looking through the manual (we applaud if
you do read the entire manual ), please store it
n a place that is easy to nd for you, because
chances are there is something you missed the
rst time around.
FEATURES
• 500W + 500W / 4 Ohms stereo power amplier
(bridgeable and patchable)
• Dual DFX, our 32/40-bit digital multi-effect pro-
cessor with 100 programs plus tap control, Test
tone generator and foot switch on/off jack
• 12 balanced Mic inputs with inserts
• Total of 16 Line inputs
• Two stereo Line input channels capable of ac-
cepting RCA/Phone inputs
• 3-band channel EQ with swept mid-range
• Stereo 7-band graphic EQ with Feedback
Detection
• Four AUX sends, where AUX 2 can be set to
pre or post fader
• Two stereo AUX returns, each can be routed to
AUX 1 & 2 sends (effect to monitor)
• Stereo RCA I/O for CD/TAPE external sources
• Vocal Eliminator
• Solid Phonic System speaker enhancement
• Grouped +48V real phantom power for broader
application
• Mono output for extra zone lling or as sub-
woofer processing source
• PFL on each input and AFL on each output
• Standby switch to mute Ch1~Ch12 for playing
music between sets
• Zone 2 output for side ll or another PA system
• Headphone/control room output with rotary lev-
el control
• One professional Speakon-type jack and two
1/4" jacks per channel for speaker connection
• Rugged metal main chassis with integrated
handle
• Less weight achieved by high-efciency switch-
ing power supply
• Optional molded protective cover prevents
scratching or damage to mixer
• Mains power switchable between 115 VAC and
230 VAC