To Next PageTo Next Page
Need help?Do you have a question about the Phonic Powerpod 620 R and is the answer not in the manual?
General| Channels | 6 |
|---|---|
| Type | Powered Mixer |
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | < 0.1% |
| Signal-to-Noise Ratio | > 90dB |
| Weight | 9.5 kg |
| Inputs | 6 Microphone/Line Inputs |
| Outputs | 1 Monitor Output |
| Effects | Digital Effects Processor |
| EQ | 3-Band EQ |
Initial steps to set up and connect the Powerpod mixer.
Guide for setting audio levels for each input channel.
Description of various input types for mixer channels, including XLR and 1/4" jacks.
Details of various inputs and outputs in the Master Section, such as Tape In, Record Out, and Main Outs.
Guide on connecting speakers to the mixer's output jacks, including bridge mode.
Description of the power button, AC connector, and voltage selector switch on the rear panel.
Explanation of EQ, level, monitor, EFX, and PAD controls for each input channel.
Controls for activating, selecting, and adjusting the built-in digital effects processor.
Controls for EFX/Monitor/Main routing, AUX/Tape inputs, and graphic equalizers.
Controls and indicators for power, amplifier mode selection, signal levels, and limiters.
Detailed steps for playing and recording audio files using the USB port on 'R'/'FR' models.
How to activate, use, and bypass the feedback silencer on 'FR' models.
Information on how to get parts, service, and repairs for the product via distributors.
Details on product warranty coverage and how to contact customer support for assistance.
