Need help?Do you have a question about the Phonic powerpod 630rw and is the answer not in the manual?
General| Brand | Phonic |
|---|---|
| Model | powerpod 630rw |
| Category | Music Mixer |
| Language | English |
Lists key features of the Powerpod 630RW mixer, including power output, effects, USB, and connectivity.
Provides step-by-step guidance for setting up and connecting the Powerpod 630RW mixer for initial use.
Details the various input connectors and their types for microphones and line-level devices.
Covers master section inputs (Tape In, AUX In) and outputs (Record Out, EFX Out, Foot Switch).
Illustrates how to connect a single speaker to each output channel of the amplifier.
Explains configurations for connecting two speakers per output channel, specifying impedance ranges.
Details how to connect speakers when the amplifier is in Bridge Mono mode for higher power output.
Details the AC power cable and power button located on the rear panel of the mixer.
Explains individual channel controls including EQ, Monitor, EFX, Level, and PAD settings.
Describes the controls for the built-in digital effects, including on/off, program selection, and parameter adjustment.
Details the AUX In and Tape In controls within the master section for managing input levels.
Explains graphic equalizers and channel level controls for adjusting audio signals.
Covers phantom power, amp select switches, level meters, and power indicator status.
Details the controls for activating and adjusting the Bluetooth audio input.
Instructions for playing back MP3 and WMA files from a USB flash drive.
Guide on recording high-quality WAV format audio to a USB flash drive.
Steps to activate, pair, and use the Bluetooth connectivity for audio streaming.
To Next Page