To Next PageTo Next Page
Need help?Do you have a question about the Phonic POWERPOD 1082R and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Microphone Inputs | 4 |
| Built-in Effects | Yes |
| Type | Powered Mixer |
| Phantom Power | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 90 dB |
| Equalizer | 3-band |
| Outputs - Other | Monitor |
Detailed list of the Powerpod mixer's key functionalities and specifications.
Step-by-step instructions for initial setup and connection of the Powerpod mixer.
Explanation of XLR, 1/4-inch Hi-Z, and stereo input types.
Details on Tape, Aux, EFX, Monitor, Main, and Power Amp connections.
Details on connecting passive speakers to the mixer's output jacks, including impedance matching.
Description of the power button, AC connector, and voltage selector.
Adjusting EQ, levels, and input signal attenuation for individual channels.
Controls for the built-in digital effects, including on/off, program selection, and parameter adjustment.
Controls for routing and mixing signals from effects, AUX, and tape inputs.
Controls for phantom power, amplifier selection, monitor/main levels, and indicators.
Instructions for playing and recording audio files using the USB port.
How to operate the onboard feedback killer to remove unwanted frequencies.
Detailed technical specifications for all Powerpod models, including power, dimensions, and connectivity.
Details on product service, repair, warranty coverage, and customer support.
List of all 16 digital effects, their parameters, and variable ranges.
Diagrams illustrating typical audio connections and setups for various Powerpod models.
Internal signal flow and component connections for different Powerpod models.
