Need help?Do you have a question about the Phonic Powerpod 1062 Plus and is the answer not in the manual?
General| Channels | 10 |
|---|---|
| Line Inputs | 4 |
| Phantom Power | Yes |
| Frequency Response | 20Hz - 20kHz |
| Type | Analog |
| Other Inputs | 1 Stereo |
| Main Outputs | 2 |
| Other Outputs | 1 (Headphone) |
| EQ Bands | 3 |
| Signal to Noise Ratio | 80 dB |
| Microphone Inputs | 6 x XLR |
Lists safety warnings and instructions for safe operation and handling.
Step-by-step guide for initial power-up and connection of the mixer.
Instructions for setting correct audio levels for each input channel.
Details on various input types for microphones and line-level devices.
Connectors for Tape In, Record Out, AUX In, Foot Switch, EFX, and Monitor outputs.
Describes the main stereo outputs and inputs for the power amplifier section.
Explains the power button, AC connector, and voltage selector switch.
To Next Page