1. Read these instructions before operating this
apparatus.
2. Keep these instructions for future reference.
3. Heed all warnings to ensure safe operation.
4. Follow all instructions provided in this document.
5. Do not use this apparatus near water or in locations
where condensation may occur.
6. Clean only with dry cloth. Do not use aerosol or liquid
cleaners. Unplug this apparatus before cleaning.
7. Do not block any of the ventilation openings. Install
in accordance with the manufacturer
’
s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If
the provided plug does not
into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories
by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table
by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-
over.
13. Unplug this apparatus during lighting
storms or when unused for long
periods of time.
14. Refer all servicing to
service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated
“
dangerous voltage
”
within the
product
’
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is in-
tended to alert the user to the presence of important operat-
ing and maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: To reduce the risk of or electric shock, do
not expose this apparatus to rain or moisture.
CAUTION: Use of controls or adjustments or performance
of procedures other than those
may result in
hazardous radiation exposure.
The apparatus shall not be exposed to dripping or splashing and that no objects
with liquids, such as vases,
shall be placed on the apparatus. The MAINS plug is used as the disconnect device, the disconnect device shall
remain readily operable.
Warning: the user shall not place this apparatus in the
area during the operation so that the mains switch
can be easily accessible.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
INTRODUCTION
Phonic would like to congratulate you on the purchase of one of
their extraordinary Powerpod mixers, powered mixers that provide
more than the average. Since its introduction, the entire Powerpod
series has given other powered mixer lines a run for their money.
With fantastically low noise levels, high signal handling abilities,
exceptional output levels, simplied signal routing abilities, and
ultra-smooth controls, the Powerpods 620, 740, 780, 1062 and
1082 models all provide a level of dependability not often found in
powered mixers as of late.
We know how eager you are to get started – getting the mixer out
and hooking all your gear up is probably your number one priority
right now – but before you do, we strongly urge you to take a look
through this manual. Inside, you will nd important facts and gures
on the set up, use and applications of your brand new mixer. If
you do happen to be one of the many people who atly refuse
to read user manuals, then we just urge you to at least glance at
the Instant Setup section. After glancing at or reading through the
manual (we applaud you if you do read the entire manual), please
store it in a place that is easy for you to nd, because chances are
there’s something you missed the rst time around.
FEATURES
Powerpod 620 Plus / 620 FR / 620 R
● 100W + 100W / 4 ohms amplier for main 1 / main 2 or main/monitor
(Bridge mono, 200W / 8 ohms)
● 32-bit digital stereo multi-effect processor with 16 programs
plus foot switch
● Stereo 7-band graphic equalizers
● 6 balanced mic inputs through XLR jacks
● 8 line inputs through 1/4" jacks
● 2 Super Hi-Z inputs optimized for direct input of acoustic electric
guitars and electric guitars or basses
● 2 built-in limiters
● 2-band channel EQ
● Pad control on channel 1~4
● Monitor and effect sends on each input channel
● 1 Aux input
● +48V phantom power
● Record output with trim control for recording level matching
● Mains power switchable between 115VAC and 230VAC
Powerpod 740 Plus / 740 FR / 740 R / 780 Plus
● Powerpod 740 Plus/FR/R: 200W + 200W/4 ohms amplier for
main L & R or main / monitor (Bridge mono, 400W / 8 ohms)
● Powerpod 780 Plus: 300W + 300W / 4 ohms amplier for main
L & R or main / monitor
● 32-bit digital stereo multi-effect processor with 16 programs
plus foot switch
● Dual 7-band graphic equalizers with In / Out switches for main
(stereo)/monitor or main L/R
● 7 balanced mic inputs through XLR jacks
● 10 line inputs through 1/4" jacks
● 2 Super Hi-Z inputs optimized for direct input of acoustic electric
guitars and electric guitars or basses
● 2 built-in limiters
● Rumbling lters for mic inputs
● 3-band channel EQ
● Pad control on channel 1~4
● Monitor and effect sends on each input channel
● 1 Aux input
● +48V phantom power
● Record output with trim control for recording level matching
● Mains power switchable between 115VAC and 230VAC
Powerpod 1062 Plus / 1062 FR / 1062 R
Powerpod 1082 Plus / 1082 FR / 1082 R
● Powerpod 1062 Plus/FR/R: 300W + 300W / 4 ohm amplier for
main L & R or main / monitor
● Powerpod 1082 Plus/FR/R: 400W + 400W / 4 ohm amplier for
main L & R or main / monitor
● 32-bit digital stereo multi-effect processor with 16 programs
plus one main parameter control, tap control and foot switch
● Dual 10-band graphic equalizers with In / Out switches for main
(stereo)/monitor or main L/R
● 9 balanced mic inputs through XLR jacks
● 12 line inputs through 1/4" jacks
● 2 Super Hi-Z inputs optimized for direct input of acoustic electric
guitars and electric guitars or basses
● 2 built-in limiters
● Rumbling lters for mic inputs
● 3-band channel EQ
● Pad control on channel 1~6
● Monitor and effect sends on each input channel
● Stereo aux input
● +48V phantom power
● Record output with trim control for recording level matching
● Mains power switchable between 115VAC and 230VAC
Powerpod ‘R’ Models Add:
● USB recorder and playback device for capturing all performances with
ease
Powerpod ‘FR’ Models Add:
● Built-in one-touch feedback elimination circuitry for destroying
feedback in live performances
● USB recorder and playback device for capturing all performances with
ease
To Next Page
Loading...
Need help?
General
