Do you have a question about the Phonic POWERPOD 740 DELUXE and is the answer not in the manual?
Brand | Phonic |
---|---|
Model | POWERPOD 740 DELUXE |
Category | Music Mixer |
Language | English |
Lists key features for both Powerpod 740 Deluxe and 1062 Deluxe models.
Step-by-step guide to initially connecting and powering on the mixer.
Procedure for setting up individual input channels for optimal audio levels.
Explains XLR, 1/4" Hi-Z, and stereo channel inputs for connecting audio sources.
Describes AUX Inputs, Tape In, and Record Outputs for external device integration.
Details the function of foot switch jacks for controlling digital effects.
Describes the 1/4" TS outputs for external effect processors or amplifiers.
Explains the 1/4" TS outputs for stage monitors or personal listening.
Describes the outputs that send the final stereo line level signal from the main mix.
Details the 1/4" phone jacks for connecting speakers and amp select switch functions.
Explains HF, MF, LF EQ, Monitor/EFX/Channel Level controls, and PAD button.
Describes the pan/balance control for stereo imaging on mono and stereo channels.
Details the digital effect display, peak indicators, program, and parameter controls.
Describes the dual 7-band graphic equalizers for frequency response adjustment.
Explains the EQ IN button and its indicator for activating the equalizer.
Describes the switch to select equalizer usage for Monitor/Main or Main 1/Main 2 signals.
Explains the rumble filter button for removing low-frequency noise on channels.
Details the +48V phantom power switch and indicator for microphone power.
Explains switches for selecting power amp output modes (Main/Monitor, Main 1/2, Bridge).
Describes the rotary control for adjusting the monitor output signal level.
Describes the rotary control for adjusting the Main L-R and speaker output signal level.
Explains the level meters for monitoring audio levels on Main and Monitor outputs.
Describes LED indicators that illuminate when the amplifier's limiters are active.
Explains the LED indicator that illuminates when the mixer's power is on.
Describes the power button located on the rear of the mixer.
Details the AC connector, power cable, and fuse information for powering the unit.
Illustrates a typical setup and connection diagram for the Powerpod 740 Deluxe.
Illustrates a typical setup and connection diagram for the Powerpod 1062 Deluxe.
Details power output, limiters, and impedance load specifications.
Lists types and quantities of input connections available on the mixer.
Lists types and quantities of output connections available on the mixer.
Details total channel strips and monitor/effect send control counts.
Lists specifications for aux sends, effect returns, faders, and level meters.
States the +48V phantom power availability and switch type.
Lists the number of programs, effect processor controls, and foot switch function.
Details the type and range of the channel equalizer.
Lists the number, type, center frequencies, and range of graphic equalizers.
Provides frequency response data for line and power amp outputs.
Details crosstalk levels between inputs and outputs.
Specifies master and channel noise floor levels.
Lists THD for mic inputs and outputs at specified conditions.
Specifies maximum output levels for various connections.
Details mains voltage and power consumption.
Provides the physical dimensions of the mixer.
States the weight of the mixer.
Lists the dimensions (A, B, C) for the Powerpod 740 Deluxe.
Lists the dimensions (A, B, C) for the Powerpod 1062 Deluxe.
Lists the weight for both Powerpod 740 and 1062 Deluxe models.
Provides a functional block diagram illustrating signal flow for the Powerpod 740 Deluxe.
Provides a functional block diagram illustrating signal flow for the Powerpod 1062 Deluxe.
Outlines Phonic's service and repair policy and how to obtain assistance.
Details the product warranty coverage, duration, and conditions for validity.
Provides contact information and resources for customer service and technical support.