Need help?Do you have a question about the Phonic Powerpod 740 Plus and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| Power Output | 740W |
| Power | 740W |
| Microphone Inputs | 4 |
| Line Inputs | 4 |
| Inputs | 8 |
| Outputs | 2 |
| EQ Bands | 3 |
| Phantom Power | Yes |
| Output Power | 740W |
| USB Interface | No |
| Weight | 13.5 kg |
| Effects | Built-in effects |
Details on XLR Lo-Z and 1/4" Hi-Z inputs for microphones and line-level devices.
Procedure for setting audio levels for each input channel.
Details on Tape In and Auxiliary Input connections for audio sources.
Describes Record, Effect, Monitor, and Main output ports for signal routing.
Port for connecting a non-latching foot switch to control digital effects remotely.
1/4" phone jacks for connecting passive speakers, with amp select for Main/Monitor or Bridge modes.
Details on the power button, AC connector, and voltage selector switch.
Explains HIGH, MID, LOW EQ, and channel level controls for audio shaping.
Adjusts signal levels for monitor and effect sends from channels.
Function of the PAD -25 dB button for line-level input attenuation.
Controls for activating, selecting, and adjusting built-in digital effects.
Controls for routing effects signal to Monitor, Main, and AUX inputs.
Details on dual 7-band graphic EQs, EQ IN, and EQ Select switch for signal shaping.
Controls for managing levels of Tape and AUX inputs to Monitor and Main mixes.
Phantom power, amplifier mode, monitor/main level controls, and level meters.
Indicators for limiters, power, and Bluetooth connection status.
Steps for playing WAV, WMA, and MP3 files from a USB drive.
Instructions for recording audio to a USB drive in WAV format.
Details on No Repeat, Repeat One, Repeat Folder, and Random modes.
How to activate, lock, and bypass the feedback killer for audio processing.
Steps to activate, pair, and use Bluetooth audio input on channel 7.
To Next Page