Phonic Road Gear 160 User Manual

page 12
RoadGear User's Manual PHONIC CORPORATION
page 13
PHONIC CORPORATION RoadGear User's Manual
Specications
RoadGear 160 RoadGear 260
Drivers Compression tweeter & 8” woofer Compression tweeter & 8” woofer
Speaker Stand Adapter 35mm 35mm
Output Power 2 x 80W @ 8 ohms 2 x 130W @ 8 ohms
Channels 3 mono & 1 stereo CH, Peak
indicator, 2-band EQ, Efx send,
pan, level
4 mono & 2 stereo CH, Peak
indicator, 2-band EQ, Efx send,
pan, level
Mono Channel
Connectors
XLR & 1/4” TRS XLR & 1/4” TRS
Stereo Channel
Connectors
2 x 1/4” TS & 2 x RCA 2 x 1/4” TS & 2 x RCA
Multi-effect Processor 4 programs 16 programs
Foot Switch Effect On / Mute Effect On / Mute
System EQ 3-band 3-band
Amp Mode L & R or MAIN & MONITOR,
with limiter indicators
L & R or MAIN & MONITOR,
with limiter indicators
Speaker Out 2 x 1/4” TS per channel with insert
Send and Return
2 x 1/4” TS per channel with insert
Send and Return
Tape Out One Stereo RCA One Stereo RCA
EFX Out & ST Return Yes, 1/4” TS Yes, 1/4” TS
Phantom Power Yes Yes
Wireless Mic Module
Socket
2 (wireless microphones and receiver
modules are optional)
2 (wireless microphones and receiver
modules are optional)
Included Accessories 1 x Phonic UM99 microphone with
clip, 20’ cable, and carry pouch
2 x Phonic UM99 microphone with
clip, 20’ cable, and carry pouch
2 x 30’ speaker cables 2 x 30’ speaker cables
1 x detachable power cable 1 x detachable power cable
1 x PVC dust cover 1 x PVC dust cover
Power Requirement Switchable between 115VAC / 60Hz
and 230VAC / 50Hz, or optional
battery power
Switchable between 115VAC / 60Hz
and 230VAC / 50Hz, or optional
battery power
Dimensions (H x W x D) 818 x 635 x 352 mm
(32.2” x 25” x 13.9”)
818 x 635 x 352 mm
(32.2” x 25” x 13.9”)
Net Weight 28 Kg (61.7 lbs) 31.4 Kg (69.2 lbs)

Phonic Road Gear 160 Specifications

General

Brand	Phonic
Model	Road Gear 160
Category	Stereo System
Language	English