Phottix Ares II - Compatibility with existing Phottix Products; Product Compatibility Overview

2
Thank you for purchasing a
Phottix product
Caution: Before using the Ares II Flash Trigger
please read these instruction carefully. Consult
the manual of your camera and ash for setting
specic functions.
The Ares II system consists of transmitter and
receiver and is designed to work in Manual
Exposure mode with the ash and camera and
has no TTL functions.
Compatibility with existing
Phottix Products
Ares II is compatible with Strato II system
when using Channels 1-4 channels
，
as long
as the transmitter and receiver are set to the
same channel and group
：
•
The Ares II Transmitter can trigger Strato
II receiver, Mitros+ in Strato II RX mode, and
Indra500/Indra360 studio light in Strato II
RX mode under the above conditions.
•
The Ares II Receiver can be triggered
by Strato II transmitter
，
Odin, Odin II
transmitter(Channels 1-4 only) and Mitros+
in Odin TX mode(Canon or Sony only).