Need help?Do you have a question about the Phottix Ares II and is the answer not in the manual?
Overview of the Phottix Ares II Flash Trigger system.
Details on Ares II compatibility with other Phottix products.
Lists the items included in transmitter and receiver sets.
Diagram and labels identifying transmitter components.
Diagram and labels identifying receiver components.
Instructions for installing AA batteries in the device.
Steps to turn the transmitter and receiver on and off.
How to use the test button to trigger flashes.
Meaning of different LED light colors and patterns.
Procedure for attaching the transmitter to a camera hot shoe.
How to mount a flash unit onto the Ares II receiver.
Using the sync cord to connect flash units to the receiver.
Overview of transmission channels, groups, and digital ID settings.
How to configure channels, groups, and digital ID on the transmitter.
How to configure channels, groups, and digital ID on the receiver.
Instructions for adjusting the LCD backlight brightness.
Important warnings regarding product handling, environment, and storage.
Information on potential RF interference and its effects.
Statement of compliance with European Union directives.
Statement regarding RF exposure limits for the device.
Statement on compliance with FCC Class B digital device limits.
FCC compliance statement specific to the receiver unit.
General| Type | Wireless Flash Trigger |
|---|---|
| Frequency | 2.4 GHz |
| Channels | 16 |
| Battery (transmitter) | 2 x AA batteries |
| Battery (receiver) | 2 x AA batteries |
| Voltage | 3V |
| Hot Shoe | Yes |
| Transmission Range | 100m+ |
| Battery | AA |
| Sync Port | Yes, 3.5mm |
| Max Sync Speed | 1/250 sec |
To Next Page
