12
Flash): Pressing the Depth of Field Preview
Button on the camera will causes flashes
connected to receivers on the same channel
(with the function enabled) to flash. This is
useful for previewing lighting set-ups.
2. Autofocus Assist Light: The AF Assist Light
of the ash connected a Strato TTL Receiver
on the same channel as a transmitter will
illuminate when needed to assist with focus (if
the function is enabled).
3. Sync Mode: The Strato TTL supports Sync
Mode settings for the flash through camera
menu “Shutter Sync.” First Curtain Sync,
Second Curtain Sync and High Speed Sync
can be enabled on the camera through this
menu.
4. Exposure Lock (FEL): The flash exposure
can be manually tested and locked by
pressing the AE-L/AF-L button on the camera.
5. Exposure Compensation: The Strato TTL
system supports exposure compensation
setting for the ash from the camera menu /
controls.
6. Zoom: Flash head zoom can be controlled
in two ways (when a flash is set to "Auto"
zoom mode, not manual zoom. See your ash
manual for further details) If the focal length
of a camera zoom lens is changed, the zoom
of a ash connected to a Strato TTL Receiver
on the same channel as a transmitter will
change dynamically. When flash zoom is
changed from a camera menu the zoom of a
flash connected to a Strato TTL Receiver on
the same channel as a transmitter will also
change correspondingly.
To Next Page
Loading...