INSTALLATION (Cont'd)
INSTALLATION TYPE B
Two factory horns each with a single wire plug.
PARTS NEEDED: Two insulated 1/4" female blade connectors
1.Cut off the factory plugs and crimp on insulated 1/4" female blade connectors
to each factory positive (+) wire.
2.Plug the new 1/4” female blade connectors to the top terminals
on the PIAA Sports Horn.
3.Plug the included ground wires to bottom terminals on the PIAA Sports Horn
and ground them to a good chasse ground (-)
.
Factory Horns
PIAA Sports Horns
To Next Page
Loading...