8/39
Thealarmsystemcanbeoperatedasfollows:
PIAGGIO4‐buttonremotecontrol(seedescriptionbelow).
PINcodeenteredviatheignitionkeytoemergencyoverridethesystem.
PIAGGIOremotecontrolfunctions:
DECLARATIONOFCONFORMITY
ThepresentdevicecomplieswithDirective2014/53/EUandUN/ECER10Rev.5.Thecompletetext
of the EU declaration
of conformity is available at the following internet address:
www.geminitech.it
WasteElectricalandElectronicEquipment(WEEE):
Thepresent devicefallswithinthefieldofappli cationofthecurrentWEEEDirective.Thecrossed‐
outwheeledbinsymbol onthe equipmentoronitspackagingindicatesthatthe product,atthe
endofitsusefullife,mustbediscardedseparatelyfromother
wastetoallowadequatetreatment
andrecycling.
Theusermustthereforetaketheequipment,attheendofitsusefullife,toanappropriatewaste
collection facility. The complete text is available at the following internet address:
www.geminitech.it
OPERATINGINSTRUCTIONS
PIAGGIOALARMMOD.1D002554
Thank you for choosing a PIAGGIO original accessory to install
on your motorbike. Before operating your original PIAGGIO
accessory, carefully read the following instructions.
ALARMSYSTEMOPERATIONDESCRIPTION
BUTTON1operatesthealarmsystem:
+15OFF:Arming/disarming.
+15ON:BUTTONS1&2arepressed
simultaneouslytoenterin
customizationmode.
BUTTON2operatesthesiren:
+15OFF:Panicalarm(withsystemdisarmedor
armed).
+15OFFsystemarmedduringentrydelay:
Exclusionofsirensound.
+15ON:BUTTONS1&2arepressed
simultaneouslytoenterincustomization
mode.
BUTTON3operatesmodulesoutputand
seat/topcasereleaseactuator:
+15OFFandsystemdisarmed:
Activatestheseat/topcaseactuator.
BUTTON4operatestheprogrammablefunctions:
+15OFFsystemarmedduringarmingdelay:
Exclusionoftiltsensor.