PIAGGIO PORTER 1.3 16V 2008 User Manual

•
Adjust the trimmer located on the ul-
trasound module.
•
Activate the alarm and wait for the end
of neutral activation time with doors,
bonnet and trunk closed.
•
Introduce a foreign matter in the vehi-
cle cab and shake it; The LED inserted
in module 5123 turns on (in addition to
the siren sound) to signal the matter
detection.
•
If sensitivity is not correct, adjust the
trimmer again and repeat operations
from the start.
•
If the adjustment carried out is correct,
position the module 5123 definitively.
Super-high frequency module connection and
positioning
Connection is simple since, the connector corre-
sponding to that present in the ultrasound module
is fitted in the alarm cable harness.
Join the 4-way connector of the alarm cable har-
ness to the 4-way connector of the super-high
frequency.
The sensor operates based on the principle of re-
flection of the high-frequency electromagnetic
waves by conductive objects (metals, human
body, etc.).
Measuring the magnitude of these reflections al-
lows detecting any foreign object moving within the
electromagnetic field, thus causing an alarm sta-
tus.
The characteristics of sensor 7059 render it unaf-
fected by air fluctuations (for example: wind, tur-
bulence, thermal variations, etc.), therefore it is
particularly suitable to be fitted on cabriolet vehi-
cles or vehicles with sunroof.
Permeability to electromagnetic waves of non-
conductive materials (plastic, fabrics, etc.) permits
Electrical system PORTER 1.3 16V
ES - 138

PIAGGIO PORTER 1.3 16V 2008 Specifications

General

Brand	PIAGGIO
Model	PORTER 1.3 16V 2008
Category	Automobile
Language	English