PIAGGIO Vespa P125X User Manual

Details engine, lubrication, fuel, cooling, clutch, gearbox, wheels, ignition, electrical, steering, brakes, and tools.

Lists key performance data like consumption, fuel capacity, max speed, dimensions, weight, and engine details.

Explains chassis and engine prefixes and serial numbers for vehicle identification.

Specifies correct tire inflation pressures for operator and passenger use.

Details fuel mixture requirements, tank capacity, and mentions the LS device option.

Outlines speed limits, checks, and procedures for the initial running-in period.

Step-by-step guide on how to start the vehicle's engine.

Instructions on how to smoothly start moving the scooter once the engine is running.

Explains the procedure for changing gears using the twist grip and clutch.

Details the correct method to safely stop the engine.

Guidance on adjusting the carburettor for idle speed and throttle cable play.

Provides methods for starting the engine if it is flooded with fuel.

Instructions for removing, checking, and replacing the spark plug.

Procedure for draining old oil and refilling the gear case with new oil.

Steps for dismantling and cleaning the air filter.

Instructions on how to remove and change wheels and tyres.

Guidance on adjusting the brake system for optimal performance.

Procedure for checking and setting the engine's ignition timing.

Steps for replacing bulbs in the headlamp assembly.

Instructions for adjusting the headlamp beam alignment.

Outlines maintenance tasks required at 4000 km and 8000 km intervals.

Recommendations for preparing the vehicle for extended storage.

Guidelines for washing, drying, polishing, and removing spots from the scooter.

Common problems like hard starting, irregular running, and electrical issues with solutions.

Details ignition, transmission ratios, starting, and carburetor for the P200E model.

Lists performance data, dimensions, and engine details specific to the P200E.

Outlines speed limits and checks for the P200E during initial running-in.

Describes lighting, signalling devices, and electrical equipment for the P200E.

Step-by-step guide for starting the P200E engine.

Details on the separate lubrication system, including tank capacities and oil type.