Piazzetta IP 78/68 - Page 9

9
IP 78/58 & 78/68 Manual December 2013
SECTION TITLE PAGE
1.0 GENERAL RULES 10
1.1 SINGLE FLUE WAY OR CHIMNEY 11
1.2 SOOT INSPECTION 11
1.3 CHIMNEY STACK 12
1.4 FRESH AIR INTAKE 13
1.5 INSTALLATION ENVIRONMENT 13
1.6 LOAD CAPACITY OF THE FLOOR 14
1.7 HEATING CAPACITY 14
1.8 SUITABLE HEAT INSULATING MATERIALS 14
1.9 MINIMUM SAFETY DISTANCES 15
1.10 FLUE WAY 15
1.11 CONNECTING TO A CONVENTIONAL CHIMNEY 18
1.12 USING AN EXTERNAL FLUE 19
1.13 HOOD GRILLS 19
1.14 WOOD MANTEL PROTECTION 19
1.15 ELECTRICAL POWER SUPPLY 20
1.16 PREVENTION OF DOMESTIC FIRES 20
2.0 TECHNICAL CHARACTERISTICS AND SPECIFICATIONS 20
2.1 FEATURES 20
2.2 TECHNICAL DATA 21
2.3 ACCESSORIES AND EQUIPMENT 21
2.4 PRODUCT IDENTIFICATION DATA 22
2.5 DIMENSIONAL DATA IP 78/58 22
2.6 DIMENSIONAL DATA IP 78/58 WITH PELLET DRAWER KIT 23
2.7 DIMENSIONAL DIAGRAM IP 78/58 WITH SUPPORT KIT 23
2.8 DIMENSIONAL DIAGRAM IP 78/58 WITH PELLET LOADING KIT 24
2.9 DIMENSIONAL DIAGRAM IP 78/58 WITH ADDITIONAL PELLET TANK KIT 24
2.10 WIRING DIAGRAM 25
3.0 FUEL 26
4.0 PREPARING FOR THE INSTALLATION 26
5.0 INSTALLATION 27
5.1 POSITION OF INSERT IN HOUSING AND CLADDING 27
5.2 CONVECTIVE AIR OUTLET POSITIONS 28
5.3 MULTIFUOCO SYSTEM 29
5.4 FIXING THE BASE 30
5.5 ELECTRICAL CONNECTIONS AND CONTROL DEVICES 31
5.6 INSTALLING THE EXTERNAL THERMOSTAT 32
5.7 ASSEMBLY OF EXTRACTABLE PART 32
5.8 INSTALLATION OF OPTIONAL SUPPORT 33
6.0 USE 34
6.1 LOADING THE PELLETS 34
6.2 REMOTE CONTROL 35
6.3 LIGHTING FOR THE FIRST TIME 36
6.4 START-UP AND NORMAL OPERATION 37
6.5 TROUBLESHOOTING 40
6.6 CONTROL PANEL 42
6.7 SETTING THE LANGUAGE 42
6.8 PROGRAMMING 43
6.9 PROGRAMMING THE CLOCK 44
6.10 TIMER 45
6.11 FAN MODE 50
6.12 MULTICOMFORT 51
6.13 ENERGY SAVING 51
6.14 PARAMETER MENUE 53
6.15 ENABLE AUDIO SIGNAL 55
6.16 STOVE STATUS 55
6.17 MODIFYING THE TRANSMISSION UNIT 56
6.18 MULTIFUOCO SYSTEM OPERATION 56
6.19 SAFETY DEVICES 57
6.20 OPENING THE DOOR 59
6.21 INSERT EXTRACTION 60
6.22 DISPOSAL OF ASHES 60
7.0 MAINTENANCE 61
7.1 CLEANING THE BRAZIER AND BRAZIER HOUSING 61
7.2 CLEANING THE COMBUSTION CHAMBER 62
7.3 CLEANING THE FLUE SYSTEM 62
7.4 CLEANING THE ENAMELLED METAL PARTS 62
7.5 CLEANING THE GLASS 63
7.6 REPLACING THE GLASS 63
7.7 REPLACING THE REMOTE CONTROL BATTERIES 63
7.8 CLEANING THE FANS 64
7.9 WHEN NOT IN USE 64
7.10 SCHEDULED MAINTENANCE 64
8.0 TROUBLESHOOTING 65
8.1 REPLACING THE FUSES 68
CERTIFICATE OF CONFORMITY 69
All manuals and user guides at all-guides.com