Connect Drum
⑩
with Housing
②
:
Connect the drum
⑩
with the housing
②
by
aligning the “▼ ” on the feeding chute
with“ ” on the housing
②
. Push the drum
hard and rotate the drum counter-clockwise
untilit aligns the “ ▼” on the feeding chute
⑧
with “ ” on the housing ②. (You will
hear “tick” sound and see the locking
button protrude to confirm you have
fastened it tightly and correctly.)
1
2
Place the auger
⑪
into the
drum
⑩
.
3
Insert the juice strainer ⑫ into the drum ⑩.
Chapter IV. How to Assemble
To Next Page
Loading...
