8
Press “on/off” button on the control panel,
then select “1” or “2” button. The juicer
will continuously work for 20 minutes.
9
Put ingredientss into the feeding inlet on
the top cap and push them with the pushing
rod.
Feed larger ingredientss through the larger
feeding inlet (e.g., apples/snow pear, etc.),
and feed others especially the long one
through the smaller feeding inlet (e.g.,
celery/cherry tomato/grapes, etc.).
Do not use too much force to push
ingredientss.
(Do not put hand or sharp object into
10
After all ingredientss being processed
completely and no juice/pomace come out
any more, turn off the switch, waiting for 5
seconds and disconnect the power supply.
(Fresh juice shall be drunk immediately,
since its taste and nutritional value will
be affected if exposed to air for a while.)
9
To Next Page
Loading...