To Next Page

To Previous Page

Wireless Connection Options

DLNA: Wireless DLNA connection allows you to mirror the screen of portable Android devices with DLNA

capability to stream Photos, Videos, Music and more via WiFi connection.

Install a DLNA player on your device such as EZCast, PPTV, Tecent Video or Imediashare.

Set the WiFi settings on your Projector (Network name & Password)

Ensure DLNA option is enabled on your device if

necessary (e.g. some Android Devices)

Scan for WiFi networks on your device (Smartphone / Laptop Etc) and connect to the projector

Once connected, open the DLNA media player on your device and select to play via DLNA, you can

normally do this by pressing the DLNA icon

in the media player.

Select the projector from the list and connect (default projector name is “Mstar DMR”).

Ensure there is no obstacle between the projector and wireless device and that they are not more than 5m away

from each other. A lon

g buffer time is usually caused by being too far from the WiFi router or from the projector.

Ensure your

bandwidth on your router is 150M or higher for optimum performance.