Need help?Do you have a question about the Pico Macom PFAM550SUB and is the answer not in the manual?
General| Brand | Pico Macom |
|---|---|
| Model | PFAM550SUB |
| Category | Modulator |
| Language | English |
Inspect equipment for shipping damage. File claims with carrier if damage is discovered.
Read this guide before installation. Contact dealer or service center for questions about the PFAM 550SUB.
Details product features, RF, audio, and general specifications including input levels and operating temperature.
Identifies and explains the function of each control, indicator, and connector on the front and rear panels.
Step-by-step guide for initial setup, including connecting IF, power, signal sources, and output.
Explains FCC mandated frequency offsets for aeronautical and navigation bands and HRC/IRC carrier methods.
Details methods for combining modulator outputs with strip amplifiers like PHC-12U, CHC-16U, and splitters.
Illustrates a two-way headend system utilizing the modulator with DBS receivers and off-air processing.
Shows a system configuration with multiple PFAM 550SUB modulators and a TBIF positive encoder.
Depicts a system setup for integrating the PFAM 550SUB modulator with a PR4200IRD satellite receiver.
Provides a comprehensive table of standard DIP switch settings for selecting various channels and their frequencies.
Outlines the product's limited warranty duration, terms, exclusions, and the procedure for obtaining service.
To Next Page
