60
- Replace and clean the face cushion
Please follow the figure below to put the face cushion into the VR Headset gap along the
edge.
The removal steps are reversed.
*Note: It is recommended to wipe the face cushion with a small amount of water. No
dry cleaning, machine washing, exposure to the sun or contact with organic solvents.
Otherwise, it may be less comfortable when the face cushion contacts your face, and the
chance of the glasses colliding with the optical lens may increase.
Pico Neo 2 User Guide R01-20190903.indd 60 2019/9/6 下午1:18
To Next Page
Need help?
General
