42
43
pico c instruction manual
Remove the Water Reservoir lid from the top of the
Pico. Look inside and check to make sure the black
rubber Drain Plug is secured inside the reservoir drain
located in the center of the back of the reservoir. Fill the
reservoir with approximately 3.5 liters of distilled or
reverse osmosis water. Replace the Water Reservoir lid.
₄
Press the Power Button on the front of the Pico.
The display will illuminate. Select Brew PicoPak and
press the Control Knob. The Pico will automatically
detect and display the PicoPak.
₅
POWER
CONTROL KNOB
unboxing setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
rack &
carbonate
serving
usage &
care
sous vide glossary
To Next Page
Loading...