80
81
pico c instruction manual
₅
Remove the Fermentation Seal on the Brew Keg.
Connect the GRAY hose to the Brew Keg IN post, this
will allow the Pico to pressurize the Brew Keg with air.
Connect the Racking Tube's connector the Brew Keg
OUT post.
₆
Direct the Racking Tube to the bucket and press
the Control Knob. The initial beer coming from the
Racking Tube may contain trub (sediment). When no
more trub flows into the waste container press the
Control Knob to stop the drain, this should take no
more than 30 seconds if needed at all, this is only to
clear out any trub.
unboxing setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
rack &
carbonate
serving
usage &
care
sous vide glossary
To Next Page
Loading...