BIP-7000
27
Remove the terminal from the <20pin USB cable>,
reboot the computer, and then, return the terminal
to the <20pin USB cable>.
The terminal does not work when you remove and
return the battery
To prevent this problem, you should press the [Send]
button or select [End] button in the Start menu with
the stylus pen so that Windows Mobile (or Windows
CE) should “Exits System” before you remove the
battery.
If you had to remove the battery due to an
unavoidable situation, and the terminal does not
work properly, press the [OK] button and the [Reset]
button at the same time for hard-reset.
Note that hard-resetting deletes data from the
memory. Only the data in the file storage are
preserved.
To Next Page
Loading...