WARRANTY | SERVICE
CERTIFICATION | CONFORMITY
PIEPS SERVICE PORTAL
The PIEPS Service Portal is the free-based online service of PIEPS. Your advantages:
• Warranty extension
• Device registration
• Information about latest software updates
• Background knowledge about your registered products
If you need further information please contact us support@pieps.com
PIEPS warranty extension free of charge: Extend the warranty of your PIEPS DSP PRO/DSP SPORT from 2 to 5
years: With the PIEPS warranty extension you have the possibility to extend the standard warranty of your PIEPS
DSP PRO/DSP SPORT free of charge. Simply register online at the PIEPS Service Portal and get your warranty
certicate for 5 years valid from the date of purchase. The warranty can be extended within 3 months from the
date of purchase.
Warranty Conditions: The device is guaranteed by the manufacturer against defects in material and workmanship
for a period of 2 years from the date of purchase. This warranty does not apply to damage caused by incorrect use,
dropping or dismantling of the device by unauthorized persons. Any further warranty or liability for consequential
damage is expressly excluded. • Warranty claims should be addressed - enclosing the receipt of purchase - to the
relevant sales outlet.
Certication: Manufacturer: Pieps GmbH; Country of manufacture: Austria; Model: PIEPS DSP02; The device
complies with the Standard ETS 300718 WEEE 2002/96/EC; Canada: IC: 7262A-DSP02; USA: FCC ID: REMDSP02;
This device complies with Part 15 of the FCC Rules and IC RSS-210. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference
received, including interference that may cause undesired operation.Warning: Any changes or modications not
expressly approved by the manufacturer, responsible for compliance, could void the user’s authority to operate this
device. On the device, the certication codes and serial number can be found within the battery compartment.
Conformity: Pieps GmbH declares hereby, that the product PIEPS DSP02 fulls all requirements and regulations
of directive 1999/5/EC. The declaration of conformity can be downloaded at the following source: http://www.
pieps.com/certication
Manufacturer, Sales & Service
Pieps GmbH, Parkring 4, 8403 Lebring, Austria, ofce@pieps.com, www.pieps.com
All information is supplied without liability. 06/2014.
The most recent version of the manual can be found at www.pieps.com
To Next Page
Loading...
Need help?
General
