Need help?Do you have a question about the PIEPS DSP and is the answer not in the manual?
General| Frequency | 457 kHz |
|---|---|
| Batteries | 3 x AAA |
| Display | LCD |
| Multiple Burial Indicator | Yes |
| Marking Function | Yes |
| Operating Temperature | -20°C to +45°C |
| Range | 50 m |
| Battery Life | 200 hours |
How to switch between Celsius and Fahrenheit for temperature readings.
Procedure for internal compass calibration due to new batteries or temperature changes.
Using MARK and SCAN to select or change the bearing direction.
Adapting the altimeter reading to air pressure and adjusting altitude settings.
To Next Page
