What to do if automatic Send Search switching does not take place on PIEPS Sports & Outdoors?
If the automatic Send Search switching does not take place on your PIEPS Sports & Outdoors device, make sure the sensor is not covered. Check the display glass, especially the sensor area, for any soiling or deposits like large snowflakes, and clean the display glass if needed.
What to do if PIEPS Sports & Outdoors shows E2 E3 E4?
If your PIEPS Sports & Outdoors device displays error E2, E3, or E4, repeat the self-check outdoors in an area free from interference. Check your immediate surroundings for external sources of interference, such as sending avalanche beacons or mobile phones. If the error persists, take the device to your retailer.
What to do if PIEPS Sports & Outdoors shows E9?
If your PIEPS Sports & Outdoors device shows error E9, switch the device off and on again in Bluetooth® mode by keeping the MARK button pressed briefly when switching on the device. If the error is still displayed, take the device to your retailer.
What to do if PIEPS Sports & Outdoors shows E7?
If your PIEPS Sports & Outdoors device displays error E7, repeat the self-check, ensuring that the sensor area is not covered during the process. Note that manual Send Search switching is performed by pressing the MARK button for 3 seconds. If the error persists, take the device to your retailer.
How to fix no indication on the display PIEPS Sports & Outdoors?
If there is no indication on the display of your PIEPS Sports & Outdoors device, check it for physical damage. Then, check the battery capacity, type, and polarity (+,-); replace the battery if needed. If there is still no display, take the device to your retailer.
What to do if PIEPS Sports & Outdoors shows E1?
If your PIEPS Sports & Outdoors device displays error E1, it indicates a system configuration issue. Take the avalanche beacon to your retailer.
What to do if PIEPS Sports & Outdoors shows E8?
If your PIEPS Sports & Outdoors device displays error E8, it indicates an issue with the accelerometer. Take the device to your retailer.
What to do if PIEPS Sports & Outdoors shows E5?
If your PIEPS Sports & Outdoors device displays error E5, it indicates a processor issue. Take the device to your retailer.
What to do if PIEPS Sports & Outdoors shows E6?
If your PIEPS Sports & Outdoors device displays error E6, it indicates an issue with the distance and/or direction indicator. Take the device to your retailer.
What to do if my PIEPS MICRO show error E2 E3 E4?
If your PIEPS Accessories device displays error code E2, E3, or E4, first repeat the self-test outdoors, away from potential interference. Check for nearby devices causing interference, such as transmitting avalanche beacons or mobile phones. If the error persists, take the unit to your retailer.
Lists general safety rules and obligations for using the device.
Details residual risks and warnings associated with operation.
Describes how to turn on the device and perform the self-test.
Explains how to perform a group check on partner beacons.
Explains device operation in Send mode.
Explains AR function for automatic switch to Send mode if buried.
Guides the user through the search process in an avalanche.
Outlines steps for responding to an avalanche emergency.
Describes starting the search with the signal search function.
Explains locating the strongest signal and approaching it.
Details the fine searching process at close range.
Describes pinpointing the exact location of the victim.
Table of errors, descriptions, and recommended measures.
General| Type | Avalanche Transceiver |
|---|---|
| Frequency | 457 kHz |
| Search strip width | 40 meters |
| Dimensions | 106 x 74 x 20 mm |
| Battery Type | 1 x AA Alkaline |
| Waterproof | Yes |
| Multiple Burial Function | Yes |
| Mark Function | Yes |
| Range | 50 m |
| Battery Life | 200 hours in send mode |
| Weight | 150 g (including battery) |
To Next Page
