Manual PIEPS MICRO | Firmware v1.0 | 07/2016 8 / 23
It is recommended to secure the unit to the belt system with a fixing strap or to the wrist
with a hand loop during use. This is intended to prevent the unit from becoming lost.
The user must read the operating manual.
3. PACKAGING
Ensure that the unit is transported only in the packaging provided. The unit can be damaged if transported in
insufficient or defective packaging. Furthermore, the unit must not be exposed to moisture or heat at any time
during transport.
If stored for an extended period, the unit should be stored in its original packaging in a dry place. This is to avoid
corrosion and soiling.
3.1 UNPACKING
Remove the MICRO carefully from the packaging, remove all transport safeguards and check whether all parts
contained in the scope of delivery are accounted for. It is recommended to retain the original packaging in case
the unit has to be returned.
Dispose of the packaging and transport safeguards in an environmentally friendly
manner (paper to paper, plastic to plastic, etc.).
3.2 SCOPE OF DELIVERY
1x PIEPS MICRO
1x Battery (in battery compartment)
1x PIEPS MICRO Carrying system
1x PIEPS Hand loop
1x PIEPS MICRO Bag
1x Quick manual
1x Registration card
1x PIEPS Sticker
Check that the contents are complete and undamaged after unpacking. If necessary,
contact your point of sale or our support team.
To Next Page
Loading...
Need help?
General
