PIEPS MICRO User Manual

Manual PIEPS MICRO | Firmware v1.0 | 07/2016 18 / 23
Number of burials
one
two
three
four or more
As soon as a signal is received, follow the directional arrow quickly and see if the distance figures reduce. If the
distance figures increase, change your direction by 180°.
go left
go straight ahead
go right
IMPORTANT! Work calmly and with concentration in
Search mode. Avoid hasty movements.
4.9.4 Fine search
From a distance of 5 m, the search speed should be notably reduced (50 cm/s). At the same time, work with the
MICRO as close to the surface of the snow as possible in this phase of the search to keep the distance to the
sender avalanche beacon to a minimum.
To prevent confusion during the fine search, the directional arrows are hidden below a distance of 2 m. Reduce
the search speed again and search by pinpointing the position of the smallest distance indicated. Work slowly and
on the surface of the snow.
The dynamic tone output supports the fine search: the close the higher/faster.

PIEPS MICRO Specifications

General

Brand	PIEPS
Model	MICRO
Category	Accessories
Language	English