What should I do if my PIEPS MICRO show error E9?
If your PIEPS Accessories device displays error code E9, try switching the unit off and on again while in Bluetooth® mode by pressing the MARK button briefly when switching it on. If the error continues to appear, take the unit to your retailer.
How to fix no display indication on PIEPS MICRO?
If your PIEPS Accessories device display shows no indication, check the unit for any physical damage. Verify the battery's capacity, type, and polarity (+,-), and replace it if needed. If the display remains blank, take the unit to your retailer.
What to do if my PIEPS MICRO Accessories show error E5?
If your PIEPS Accessories device displays error code E5, take the unit to your retailer.
What to do if my PIEPS Accessories show error E8?
If your PIEPS Accessories device displays error code E8, take the unit to your retailer.
General| Type | Avalanche Transceiver |
|---|---|
| Frequency | 457 kHz |
| Search strip width | 40 meters |
| Dimensions | 106 x 74 x 20 mm |
| Battery Type | 1 x AA Alkaline |
| Waterproof | Yes |
| Multiple Burial Function | Yes |
| Mark Function | Yes |
| Range | 50 m |
| Battery Life | 200 hours in send mode |
| Weight | 150 g (including battery) |
Lists general safety rules and obligations for using the device.
Details residual risks and warnings associated with operation.
Describes how to turn on the device and perform the self-test.
Explains how to perform a group check on partner beacons.
Explains device operation in Send mode.
Explains AR function for automatic switch to Send mode if buried.
Guides the user through the search process in an avalanche.
Outlines steps for responding to an avalanche emergency.
Describes starting the search with the signal search function.
Explains locating the strongest signal and approaching it.
Details the fine searching process at close range.
Describes pinpointing the exact location of the victim.
Table of errors, descriptions, and recommended measures.
To Next Page
