What to do if my PIEPS Security System shows no indication on the display?
First, check the device for any physical damage. Then, check the battery capacity, type, and polarity (+, -). If necessary, replace the batteries.
What to do if my PIEPS Security System displays error E2 E3 E4?
Repeat the self-check in an area free from interference (outdoors) and check for electronic, magnetic and metallic sources of interference.
Why does my PIEPS Security System show error E9?
The error E9 means that Bluetooth activation and/or connection is not possible. Retry to activate the Bluetooth mode.
What does error E7 mean on my PIEPS Security System?
Error E7 indicates a Switch Safety Check issue. Please perform a mode check of both send and search function and perform a device check via the App and follow the recommendations.
Why does my PIEPS Security System show error E0?
The error E0 means high current.
What does error E1 mean on my PIEPS Security System?
The error E1 means system configuration problem.
Why does my PIEPS Security System show error E5?
The error E5 means processor problem.
What does error E6 mean on my PIEPS Security System?
The error E6 means distance and/or direction indicator problem.
Why does my PIEPS Security System show error E8?
The error E8 means accelerometer problem.
What to do if there is no indication on the PIEPS POWDER BT display?
If your PIEPS Transceiver's display shows no indication, first, check the device for any physical damage. Then, verify the battery capacity, type, and polarity (+, -). Replace the batteries if necessary. If the problem persists, take the device to your retailer.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.
Outlines general safety rules and user obligations for operating the PIEPS beacon correctly.
Details residual risks, interference warnings, and best practices for safe operation.
Guides users through powering on the device, performing self-checks, and switching to send mode.
Details the systematic steps for searching for buried victims in an avalanche scenario.
Lists common error codes and their corresponding measures for troubleshooting device issues.
General| Frequency | 457 kHz |
|---|---|
| Dimensions | 118 x 76 x 29 mm |
| Bluetooth | Yes |
| Batteries | 3 x AAA |
| Marking function | Yes |
| Number of Antennas | 3 |
| Display | Yes |
| Multiple Burial Indicator | Yes |
| Waterproof | Yes |
| Search Strip Width | 60 m |
| Weight | 230 grams (including batteries) |
| Search Range | 60 m |
To Next Page
