What to do if my PIEPS Transceiver shows E2 E3 E4 error?
If your PIEPS Transceiver displays error codes E2, E3, or E4, repeat the self-check in an area free from interference, ensuring you are outdoors and away from electronic, magnetic, and metallic sources of interference. If the error persists, take the device to your retailer.
What to do if my PIEPS Transceiver displays error E9?
General| Frequency | 457 kHz |
|---|---|
| Dimensions | 118 x 76 x 29 mm |
| Bluetooth | Yes |
| Batteries | 3 x AAA |
| Marking function | Yes |
| Number of Antennas | 3 |
| Display | Yes |
| Multiple Burial Indicator | Yes |
| Waterproof | Yes |
| Search Strip Width | 60 m |
| Weight | 230 grams (including batteries) |
| Search Range | 60 m |
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.
Outlines general safety rules and user obligations for operating the PIEPS beacon correctly.
Details residual risks, interference warnings, and best practices for safe operation.
Guides users through powering on the device, performing self-checks, and switching to send mode.
Details the systematic steps for searching for buried victims in an avalanche scenario.
Lists common error codes and their corresponding measures for troubleshooting device issues.
To Next Page
