6
The device is now in send mode, the transmit control LED (1G) is blinking.
SEND SEARCH
Move the slider lock (1C) to the left and the slider (1B) upwards in the position SEARCH.
SEARCH SEND
Move the slider (1B) downwards, until it locks in the position SEND.
SECONDARY AVALANCHE | AUTO-SEARCH-TO-SEND
The PIEPS PRO BT/POWDER BT provides the feature Auto-Search-to-Send. By default, it is dis-
abled and can be enabled in the PIEPS APP device manager. Once enabled, the device switches
from search mode to send mode automatically after a certain time without motion (burial).
GROUP CHECK
Despite a comprehensive self-check, a beacon check (send check and receive check) is obliga-
tory prior to every tour! The PIEPS PRO BT/POWDER BT provides the group check function. In
group check mode the receiving range is limited to 1 m.
Group check regular
PIEPS PRO BT/POWDER BT
Check: frequency
Group check extended
PIEPS PRO BT only
Check: frequency/pulse/period
Start Press and hold the button MARK
(1D) during the group check count-
down (CH)
Press and hold the button SCAN (1E)
during the group check countdown (CH)
Result • “Distance indication“ = OK
• “Er“ = error (frequency not
according to standard)
• “OK“ = OK
• “Er“ = error (one or more transmit
parameters not according to
standard)
End Release button
The PIEPS PRO BT additionally provides a pro mode. The pro mode allows a transmit check as
well as a receive check without exiting the group check mode. By default, it is disabled and can
be enabled in the PIEPS APP device manager.
SEARCH MODE | SEARCH STRATEGY
SIGNAL SEARCH (5A)
Walk the search strip width in the search area quickly. The recommended search strip width for
the PIEPS PRO BT/POWDER BT is 60 m. The display shows “no signal” (5A1).
COARSE SEARCH (5B)
To Next Page
Loading...
