CP600 Pivot Operators Manual
OPERATION, SAFETY & MAINTENANCE
Section 1-11
© Pierce Corporation
July 2010
Lock Out / Tag Out: lock the main power disconnect before servicing or troubleshooting
electrical components.
• ELECTRICAL: Check pivot and junction box starters for burned or pitted contacts.
• ELECTRICAL: Check all wire connections, particularly on starters, to ensure they are tight.
• ELECTRICAL: Check safety limit switches in tower junction boxes.
• ELECTRICAL: Check function of automatic switching devices such as Auto Reverse, Auto
Stop and End Gun (lube as required).
• CONTROL: Check junction box cam and bushings. Turn cam back and forth several
times to ensure there is no binding.
Maintenance Check List
To Next Page
Loading...
