Pierenkemper Operating Manual - PierenPlus basic
66
Electrodes
The electrodes included in the delivery amount are developed in accordance with
the index of medical appliances (Hilfsmittelverzeichnis) PG 09.99.01.
The electrodes are suited for multiple-use. During normal therapy, the electrodes
can be used for at least 30 days.
Advice! Clean your skin at the area of application from sweat, humidity or
contamination. Do not put on crèmes or balms before treatment.
» Important: Do not place the electrodes onto irritated or aected skin areas.
» Important: If you wish to change the electrodes’ position, switch OFF the device
at first. Any leftovers from the electrodes can be easily cleaned o with water
and soap.
Technical data
2-channel electro stimulator with separated outputs, 12 integrated and 4 editable
programmes.
Power supply 6.0 V (4 x 1.5 V battery AAA type micro e. g. LR03)
or 4.8 V (4 x 1.2 V rechargeable battery AAA)
Current consumption Max. 130 mA (therapy) Approx. 60 µA (power down)
Dimensions Approx. 140 mm x 64 mm x 28 mm
Weight Approx. 96 g (without batteries)
Output current 0-60 mA (with 1 kΩ load)
Pulse form Biphasic rectangle pulse
Frequency range 1-120 Hz
Pulse width 75-300 µs
Operating conditions Temperature range: 10 °C to 40 °C, Relative humidity:
30 % to 90 %
Storage conditions Temperature range: -10 °C to 55 °C, Relative humidity:
10 % to 90 %
To Next Page
Loading...